Medusa Box v.2.4.5 Updated

Medusa Box v.2.4.5 is out!

We have added boot repair via USB and small TP for:
LG D280N, D280G, LG D285, D285F, D285G, D315, D315K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Medusa Box v.2.4.5 Release Notes:

- Added support for the following models:
LG D280N - added Dead Boot Repair via USB
LG D280G - added Dead Boot Repair via USB
LG D285 - added Dead Boot / Device Repair via USB
LG D285F - added Dead Boot Repair via USB
LG D285G - added Dead Boot Repair via USB
LG D315 - added Dead Boot Repair via USB
LG D315K - added Dead Boot / Device Repair via USB

- Added new Core ID (107180E1) for Qualcomm APQ8064
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)