Medusa Box v.2.4.8 is out!
We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.
Medusa Box v.2.4.8 Release Notes:
- Added support for the following models:
LG E960 - added Dead Boot / Device Repair via USB
LG F200K - added Dead Boot Repair via USB
LG F200L - added Dead Boot Repair via USB / JTAG
LG F200LS - added Dead Boot Repair via USB
LG F200S - added Dead Boot Repair via USB
Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)
To repair mentioned above devices via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
0 comments:
Post a Comment